Posts Tagged ‘DS3231M’

Using Ultimate GPS to bootstrap Maxim DS3231M

Wednesday, June 11th, 2014

I’m currently building a project that is based around a Maxim DS3231M, which is an I2C-attached RTC.

I’m currently using the chip through the TinyTempus breakout from Phenoptix which only lacks the 32.768 KHz output which I don’t use anyway. I’m using the provided CR1216 battery to keep the clock ticking at all times however I had a need to get the clock set to the right time.

As I had an Adafruit Ultimate GPS breakout I figured it would be easy to just use the time from that to bootstrap the clock to the right time rather than deal with user input. I put together the following basic circuit:

ds3231-from-gps

I’ve uploaded the sketch I wrote to GitHub: https://github.com/bodgit/ds3231-from-gps

The sketch uses the undocumented $GPZDA NMEA sentence to retrieve the time from the GPS module and reprograms the DS3231 on receipt of every new sentence so you just need to run the sketch long enough to get the message that the clock is set. Assuming your battery is good, the clock will keep ticking and maintain time accurately after you pull the power.